Máy hiện sóng tương tự Uni OS-9100A (100MHz, 2CH)

Máy hiện sóng tương tự Uni OS-9100A (100MHz, 2CH)

THÔNG SỐ KỸ THUẬT:
Hãng sản xuất: UNI-Hàn quốc
Xuất xứ: Trung quốc
Tần số: 100MHz 
Số kênh: 2
Điện áp vào Max: 400V(DC+ACpeak)
Độ nhạy trục đứng: 5mV/div to 5V/div 1-2-5 step, 10 steps (1mV/div to 1V/div)
Độ nhạy trục ngay : 0.1uS/div đến 0.2s/div 
Chế độ: Trigger, Sweep
Nguồn: AC 220V±10% / 50hz±5%
Kích thước(W×H×D): 321×132×376mm
Trọng lượng: 7.2Kg
Bảo hành: 12 tháng

- A. B dual time base sweep displayed sync.
- High sensitivity up to 1mV/div
- Magnification setting for ΔT of main sweep A via delay sweep B
- Hold off function
- Fine outline, high price performance ratio
- Sweep rate : 0.1uS/div to 0.2s/div
- Hold Off function
- Max. input : 400V(DC+ACpeak) at AC freq ≤ 1KHz
Specifications OS-9100A


Vertical Axis Deflection Factor 5mV/div to 5V/div 1-2-5 step, 10 steps (1mV/div to 1V/
div at ×5 MAG)

Accuracy x1 : ±5%, x5 : ±8%, VAR or Cal position

Variable Ratio ≥ 2.5 times

Bandwidth DC : 0 to 100MHz / AC:10Hz to 100MHz(-3dB)

×5MAG DC : 0 to 15MHz / AC:10Hz to 15MHz(-3dB)

20MHz Bandwidth DC : 0 to 20MHz / AC:10Hz to 20MHz(-3dB)

Rise time Approx. 3.5ns / Approx. 23ns at x5 /
Approx. 17ns at 20Mhz bandwidth

Impedance 1MΩ±2%, 25 pF±3pF

Maximum input voltage 400V(DC+ACpeak) at AC Freq. ≤ 1KHz

Coupling AC-GND-DC

Mode CH1, CH2, ADD, DUAL

Invert CH2 only

Overshot ≤ 5%

Horizontal System Sweep Mode A, B, B rigger, ALT, X-Y

Sweep Rate A : 0.05uS/div ~ 0.2S/div ±5%, 1-2-5, 21 steps
B : 0.05uS/div ~ 10uS/div ±5%, 1-2-5, 8 steps

Sweep Expansion X10 : ±8% (0.1, 0.05uS/div : non-cal)

Sweep Variable Ratio ≥ 2.5 times

Delay Series delay or trigger delay

Hold Off Continuous to change 2 times


Horizontal System Sweep Mode X1, x10, x1, x10 alter

Sweep Rate 0.1uS/div ~ 0.2S/div ±5%, 1-2-5, 20 steps

Sweep Mag. 10nS/div to 20mS/div

Alter-Mag. 4 trace

Trace Separate ≤ 1.5div


X-Y Mode Deflection Same as Y

X axis bandwidth DC-2MHz

Phase error ≤ 30 (DC-100KHz)


Trigger System Trigger mode AUTO, NORM, TV-V,TV-H

Trigger Source INT, CH2, LINE, EXT

Slope ＋, －

Trigger Value FREQ: DC~100MHz / INT : 2div / EXT : 0.5V

TV Sync Int. : 2div / Ext : 1Vp-p

EXT Trigger Input Input Impedance : Approx. 1MΩ / 25 pF
400V(DC+ACpeak), AC FREQ. ≤1KHz


Z axis Input impedance Approx. 40kΩ

Maximum input voltage 30V (DC+AC peak), AC FREQ. ≤1KHz

Band width DC to 2MHz

Input Voltage ±5V


Calibration Frequency 1Khz / Square waveform

Voltage 0.5V(±3%)


Power supply Power Supply AC 220V±10% / 50hz±5%

Power Consumtion Approx. 35VA

NET .Weight Approx. 7.2Kg

Dimension(W×H×D) 321×132×376mm

ETCO.VN